Код:[Выделить]
et7x00 login: root
root@et7x00:~# cat /proc/cpuinfo
system type             : BCM7362A0 STB platform
machine                 : Unknown
processor               : 0
cpu model               : Brcm4380 V6.5  FPU V0.1
BogoMIPS                : 749.56
cpu MHz                 : 751.535
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : no
isa                     : mips1 mips2 mips32r1
ASEs implemented        : mips16
shadow register sets    : 1
kscratch registers      : 0
package                 : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

processor               : 1
cpu model               : Brcm4380 V6.5  FPU V0.1
BogoMIPS                : 753.66
cpu MHz                 : 751.535
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : no
isa                     : mips1 mips2 mips32r1
ASEs implemented        : mips16
shadow register sets    : 1
kscratch registers      : 0
package                 : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

Код:[Выделить]
root@et7x00:~# hostname
et7x00
root@et7x00:~# uname -m
mips
root@et7x00:~# uname -a
Linux et7x00 3.18.24 #1 SMP Sun Dec 6 22:57:29 CET 2015 mips GNU/Linux

Код:[Выделить]
root@et7x00:~# cat /proc/version
Linux version 3.18.24 (andre@BISS) (gcc version 5.2.0 (GCC) ) #1 SMP Sun Dec 6 22:57:29 CET 2015

Код:[Выделить]
root@et7x00:~# df -h
Filesystem                Size      Used Available Use% Mounted on
ubi0:rootfs             217.2M     64.1M    153.0M  30% /
devtmpfs                120.3M      4.0K    120.3M   0% /dev
tmpfs                    64.0K         0     64.0K   0% /media
tmpfs                   120.4M     92.0K    120.3M   0% /var/volatile

Код:[Выделить]
root@et7x00:~# ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supported pause frame use: No
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
        Link partner advertised pause frame use: Symmetric Receive-only
        Link partner advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: ags
        Wake-on: d
        SecureOn password: 00:00:00:00:00:00
        Link detected: yes

Код:[Выделить]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.12.23 23:20:53 =~=~=~=~=~=~=~=~=~=~=~=
 
BCM73620000

M0CZS
L2=1
LLMB=1
rCfg=E30FB7C6
#@

BCM97362A0 CFE v14.3, Endian Mode: Little
Build Date: Thu Sep 10 15:37:24 KST 2015
Copyright (C) Broadcom Corporation.

Enabling NAND flash at CS1: S34ML02G2(DEVICE ID=0x1DA9095), ECC Level=4, Spare Area Size=32
SPANSION SPI flash detected: spi_lookup_device_type, mem_type = 2, mem_density = 15
Size = 4MB, Sector Size 65536, Page Size 256

CPU speed:            751MHz
DDR Frequency:        796 MHz
DDR Mode:             DDR3
Total memory(MEMC 0): 512MB
MEMC 0 DDR Width:     16
Boot Device:          SPI
Total flash:          4MB
RTS VERSION:          Initial RTS Version
ETH0_PHY:             INT
ETH0_MDIO_MODE:       1
ETH0_SPEED:           100
ETH0_PHYADDR:         1

Initializing USB.

CFE initialized.
Starting splash screen.
Found splash image 0 - Width = 720 Height = 576

USB device matching <USB> not found!
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/8976000 0x80890680/18620 Entry address is 0x806be510
Starting program at 0x806be510

Linux version 3.18.18 (build@buildserver) (gcc version 4.9.1 (GCC) ) #1 SMP un Sep 13 12:06:58 CEST 2015
Fetching vars from bootloader... found 13 vars.
Options: moca=0 sata=1 pcie=0 USB=1
Using 512 MB + 0 MB RAM (from CFE)
bootconsole [early0] enabled
CPU0 revision is: 0002a065 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 10000000 @ 20000000 (usable)
bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
Zone ranges:
  Normal   [mem 0x00000000-0x2fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x2fffffff]
Initmem setup node 0 [mem 0x00000000-0x2fffffff]
Primary instructon cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 9 pages/cpu @81606000 s5760 r8192 d22912 u36864
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129536
Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 246552K/524288K available (6951K kernel code, 309K rwdata, 1284K rodata, 268K init, 119K bss, 277736K reserved)
Hierarchical RCU implementation.
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 751 MHz (375.765 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
SMP: Booting CPU1...
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
CPU1 revision is: 0002a065 (Brcm4380)
FPU revision is: 00130001
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver USB
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered UDP transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.23)
msgmni has been set to 481
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [early0] disabled
bootconsole [early0] disabled
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
strict-ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
strict-ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
strict-ahci strict-ahci.0: flags: sntf stag clo slum part
scsi host0: ahci_platform
scsi host1: ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
brcmstb_nand: NAND controller driver is loaded
netif_napi_add() called with weight 256 on device eth%d
bcmgenet: configuring instance #0 for internal PHY
bcmgenet bcmgenet.0 (unnamed net_device) (uninitialized): link down
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Cntroller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver USB-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
ata1: SATA link down (SStatus 0 SControl 300)
usbhid: USB HID core driver
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS1: setting up NAND flash (primary)
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G2
nand: 256MiB, SLC, page size: 2048, OOB size: 128
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G2
nand: 256MiB, SLC, page size: 2048, OOB size: 128
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 32B OOB, 8-bit, BCH-4