Сообщения пользователя - ANUSHKA » Форум Спутниковый мир

[quote=zmej74]где пишет?
Вообще-то по dmesg видно, что с USB все нормально, твой модем определился и сел на порт /dev/ttyACM0 (обычно на OpenWrt туда "садятся" все Пантечи).
Как вариант
1. На закладке Modem введи логин и пароль (IT) сохрани и перегрузись. Если не заработает - выложи логи System и Kernel (доступны на закладке Status). Только прячь логи под спойлер.
2. А что если в настройке Wan в качестве порта указать Custom? что будет дальше? Покажи скрин.[/quote][quote=zmej74]где пишет?
WAN sustom-вручную прописать (пример-/dev/ttyUSB0). system log

Показать / Скрыть текст

Sep 8 16

20 OpenWrt kern.err kernel: [ 811.670000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

20 OpenWrt kern.err kernel: [ 811.890000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

20 OpenWrt kern.err kernel: [ 812.110000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

20 OpenWrt kern.err kernel: [ 812.330000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

21 OpenWrt kern.err kernel: [ 812.550000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

21 OpenWrt kern.err kernel: [ 812.770000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

21 OpenWrt kern.err kernel: [ 812.990000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

21 OpenWrt kern.err kernel: [ 813.210000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

21 OpenWrt kern.err kernel: [ 813.430000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

22 OpenWrt kern.err kernel: [ 813.650000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

22 OpenWrt kern.err kernel: [ 813.870000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

22 OpenWrt kern.err kernel: [ 814.090000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

22 OpenWrt daemon.info dnsmasq[1759]: started, version 2.62 cachesize 150
Sep 8 16

22 OpenWrt daemon.info dnsmasq[1759]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Sep 8 16

22 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sep 8 16

22 OpenWrt daemon.info dnsmasq[1759]: using local addresses only for domain lan
Sep 8 16

22 OpenWrt daemon.warn dnsmasq[1759]: no servers found in /tmp/resolv.conf.auto, will retry
Sep 8 16

22 OpenWrt daemon.info dnsmasq[1759]: read /etc/hosts - 1 addresses
Sep 8 16

22 OpenWrt daemon.info dnsmasq-DHCP[1759]: read /etc/ethers - 0 addresses
Sep 8 16

22 OpenWrt kern.err kernel: [ 814.310000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

23 OpenWrt kern.err kernel: [ 814.530000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

23 OpenWrt kern.err kernel: [ 814.750000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

23 OpenWrt kern.err kernel: [ 814.970000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

23 OpenWrt kern.err kernel: [ 815.190000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

23 OpenWrt kern.err kernel: [ 815.410000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

24 OpenWrt kern.err kernel: [ 815.630000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

24 OpenWrt kern.err kernel: [ 815.850000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

24 OpenWrt kern.err kernel: [ 816.070000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

24 OpenWrt kern.err kernel: [ 816.290000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

25 OpenWrt kern.err kernel: [ 816.510000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

25 OpenWrt kern.err kernel: [ 816.730000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

25 OpenWrt kern.err kernel: [ 816.950000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

25 OpenWrt kern.err kernel: [ 817.170000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

25 OpenWrt kern.err kernel: [ 817.390000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

26 OpenWrt kern.err kernel: [ 817.610000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

26 OpenWrt kern.err kernel: [ 817.830000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

26 OpenWrt kern.err kernel: [ 818.050000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

26 OpenWrt kern.err kernel: [ 818.270000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

27 OpenWrt kern.err kernel: [ 818.490000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

27 OpenWrt kern.err kernel: [ 818.710000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

27 OpenWrt kern.err kernel: [ 818.930000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

27 OpenWrt kern.err kernel: [ 819.150000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

27 OpenWrt kern.err kernel: [ 819.370000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

28 OpenWrt kern.err kernel: [ 819.590000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

28 OpenWrt kern.err kernel: [ 819.810000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

28 OpenWrt kern.err kernel: [ 820.030000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

28 OpenWrt kern.err kernel: [ 820.250000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

29 OpenWrt kern.err kernel: [ 820.470000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

29 OpenWrt kern.err kernel: [ 820.690000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

29 OpenWrt kern.err kernel: [ 820.910000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

29 OpenWrt kern.err kernel: [ 821.130000] hub 1-0:1.0: unable to enumerate USB device on port 1
Sep 8 16

29 OpenWrt kern.info kernel: [ 821.410000] USB 1-1: new high-speed USB device number 4 using ehci-platform
Sep 8 16

30 OpenWrt kern.info kernel: [ 821.560000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
Sep 8 16

30 OpenWrt kern.info kernel: [ 821.570000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
Sep 8 16

30 OpenWrt kern.info kernel: [ 821.570000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform-1, WWAN/QMI device, 7e:6f:4a:a6:aa:30
Sep 8 16

30 OpenWrt user.notice USB-modeswitch: Remove 1-1 1d6b
Sep 8 16

30 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCPREQUEST(br-lan) 192.168.1.174 74:de:2b:e5:f3:04
Sep 8 16

30 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCPACK(br-lan) 192.168.1.174 74:de:2b:e5:f3:04
Sep 8 16

30 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCPREQUEST(br-lan) 192.168.1.174 74:de:2b:e5:f3:04
Sep 8 16

30 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCPACK(br-lan) 192.168.1.174 74:de:2b:e5:f3:04
Sep 8 16

30 OpenWrt daemon.notice netifd: Interface 'wan' is now down
Sep 8 16

30 OpenWrt user.notice USB-modeswitch: 1-1:1.0: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 0
Sep 8 16

30 OpenWrt user.notice qmihelp : Driver Name : 4 qmi_wwan
Sep 8 16

30 OpenWrt user.notice USB-modeswitch: ProtoFind returns : 2
Sep 8 16

33 OpenWrt kern.info kernel: [ 824.610000] br-lan: port 2(wlan0) entered disabled state
Sep 8 16

33 OpenWrt kern.info kernel: [ 824.610000] device wlan0 left promiscuous mode
Sep 8 16

33 OpenWrt kern.info kernel: [ 824.610000] br-lan: port 2(wlan0) entered disabled state
Sep 8 16

33 OpenWrt kern.info kernel: [ 824.620000] device eth0 left promiscuous mode
Sep 8 16

33 OpenWrt kern.info kernel: [ 824.630000] br-lan: port 1(eth0) entered disabled state
Sep 8 16

34 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Sep 8 16

34 OpenWrt kern.info kernel: [ 825.670000] device eth0 entered promiscuous mode
Sep 8 16

34 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Sep 8 16

34 OpenWrt daemon.warn dnsmasq-DHCP[1759]: DHCP packet received on wlan0 which has no address
Sep 8 16

34 OpenWrt user.notice sierra_set: SierraSet is active for QMI
Sep 8 16

34 OpenWrt user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sep 8 16

37 OpenWrt daemon.warn dnsmasq-DHCP[1759]: DHCP packet received on wlan0 which has no address
Sep 8 16

39 OpenWrt kern.info kernel: [ 830.530000] device wlan0 entered promiscuous mode
Sep 8 16

39 OpenWrt kern.info kernel: [ 830.690000] br-lan: port 2(wlan0) entered forwarding state
Sep 8 16

39 OpenWrt daemon.info hostapd: wlan0: STA 74:de:2b:e5:f3:04 IEEE 802.11: authenticated
Sep 8 16

39 OpenWrt daemon.info hostapd: wlan0: STA 74:de:2b:e5:f3:04 IEEE 802.11: associated (aid 1)
Sep 8 16

39 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCPREQUEST(br-lan) 192.168.1.174 74:de:2b:e5:f3:04
Sep 8 16

39 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCPACK(br-lan) 192.168.1.174 74:de:2b:e5:f3:04
Sep 8 16

39 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCPREQUEST(br-lan) 192.168.1.174 74:de:2b:e5:f3:04
Sep 8 16

39 OpenWrt daemon.info dnsmasq-DHCP[1759]: DHCPACK(br-lan) 192.168.1.174 74:de:2b:e5:f3:04
Sep 8 16

41 OpenWrt kern.info kernel: [ 832.690000] br-lan: port 2(wlan0) entered forwarding state
Sep 8 16

42 OpenWrt user.notice USB-modeswitch: 1-1:1.1: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

42 OpenWrt user.notice USB-modeswitch: 1-1:1.2: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

42 OpenWrt user.notice USB-modeswitch: 1-1:1.3: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

42 OpenWrt user.notice USB-modeswitch: 1-1:1.4: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

43 OpenWrt user.notice USB-modeswitch: 1-1:1.5: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

43 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.0 106c
Sep 8 16

43 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.1 106c
Sep 8 16

43 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.2 106c
Sep 8 16

44 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.3 106c
Sep 8 16

44 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.4 106c
Sep 8 16

44 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.5 106c
Sep 8 16

44 OpenWrt user.notice USB-modeswitch: Remove 1-1 106c
Sep 8 16

44 OpenWrt user.notice USB-modeswitch: 1-1:1.0: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

45 OpenWrt user.notice USB-modeswitch: 1-1:1.1: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

45 OpenWrt user.notice USB-modeswitch: 1-1:1.2: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

45 OpenWrt user.notice USB-modeswitch: 1-1:1.3: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

45 OpenWrt user.notice USB-modeswitch: 1-1:1.4: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

46 OpenWrt user.notice USB-modeswitch: 1-1:1.5: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

46 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.0 106c
Sep 8 16

46 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.1 106c
Sep 8 16

46 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.2 106c
Sep 8 16

47 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.3 106c
Sep 8 16

47 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.4 106c
Sep 8 16

47 OpenWrt user.notice USB-modeswitch: Remove 1-1:1.5 106c
Sep 8 16

48 OpenWrt user.notice USB-modeswitch: Remove 1-1 106c
Sep 8 16

48 OpenWrt user.notice USB-modeswitch: 1-1:1.0: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

48 OpenWrt user.notice USB-modeswitch: 1-1:1.1: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

49 OpenWrt user.notice USB-modeswitch: 1-1:1.2: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

49 OpenWrt user.notice USB-modeswitch: 1-1:1.3: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

49 OpenWrt user.notice USB-modeswitch: 1-1:1.4: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

49 OpenWrt user.notice USB-modeswitch: 1-1:1.5: Manufacturer=Pantech,_Incorporated Product=PANTECH_UML290 Serial=? 106c 3718 1 1
Sep 8 16

03 OpenWrt user.notice Port Change : : dwn
Sep 8 16

03 OpenWrt user.notice Port Change : : Port down 0
Sep 8 16

34 OpenWrt user.notice sierra_set: SierraSet is running qmihelp
Sep 8 16

34 OpenWrt daemon.notice netifd: wan (2040): uci: Entry not found
Sep 8 16

34 OpenWrt user.notice qmihelp : wwan0: ===Starting QMI script===
Sep 8 16

34 OpenWrt user.notice qmihelp : wwan0: Will use /dev/cdc-wdm0 as management port
Sep 8 16

47 OpenWrt user.notice qmihelp : wwan0: Qmi Revision: L0290VWBB12F.248 1 [Nov 9 2011 08

21]
Sep 8 16

47 OpenWrt user.notice qmihelp : wwan0: Script Command : start
Sep 8 16

47 OpenWrt user.notice qmihelp : wwan0: Attempt to Start Network
Sep 8 16

47 OpenWrt user.notice qmihelp : wwan0: Checking Pin Status
Sep 8 16

51 OpenWrt user.notice qmihelp : wwan0: PIN1 verification failed
Sep 8 16

51 OpenWrt user.notice qmihelp : wwan0: SIM card missing?
Sep 8 16

51 OpenWrt user.notice qmihelp : wwan0: ***Cannot Connect without PIN verification
Sep 8 16

02 OpenWrt user.notice qmihelp : wwan0: Cleaning Up Script
Sep 8 16

06 OpenWrt user.notice qmihelp : wwan0: ===End of QMI Script===
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: ===Starting QMI script===
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: Will use /dev/cdc-wdm0 as management port
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: Qmi Revision: L0290VWBB12F.248 1 [Nov 9 2011 08

21]
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: Script Command : start
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: Attempt to Start Network
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: Checking Pin Status
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: PIN1 verification failed
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: SIM card missing?
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: ***Cannot Connect without PIN verification
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: Cleaning Up Script
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (2040): wwan0: ===End of QMI Script===
Sep 8 16

06 OpenWrt user.notice sierra_set: SierraSet has run qmihelp
Sep 8 16

06 OpenWrt daemon.notice netifd: wan (3015): udhcpc (v1.19.4) started
Sep 8 16

07 OpenWrt daemon.notice netifd: wan (3015): Sending discover...
Sep 8 16

10 OpenWrt daemon.notice netifd: wan (3015): Sending discover...
Sep 8 16

13 OpenWrt daemon.notice netifd: wan (3015): Sending discover...
Sep 8 16

48 OpenWrt daemon.notice netifd: wan (3015): Received SIGTERM
Sep 8 16

48 OpenWrt daemon.notice netifd: Interface 'wan' is now down
Sep 8 16

48 OpenWrt user.notice sierra_set: SierraSet is active for QMI
Sep 8 16

48 OpenWrt user.notice sierra_set: SierraSet is running qmihelp
Sep 8 16

48 OpenWrt user.notice qmihelp : wwan0: ===Starting QMI script===
Sep 8 16

48 OpenWrt user.notice qmihelp : wwan0: Will use /dev/cdc-wdm0 as management port
Sep 8 16

13 OpenWrt user.notice qmihelp : wwan0: Qmi Revision: L0290VWBB12F.248 1 [Nov 9 2011 08

21]
Sep 8 16

13 OpenWrt user.notice qmihelp : wwan0: Script Command : start
Sep 8 16

13 OpenWrt user.notice qmihelp : wwan0: Attempt to Start Network
Sep 8 16

13 OpenWrt user.notice qmihelp : wwan0: Checking Pin Status
Sep 8 16

22 OpenWrt user.notice qmihelp : wwan0: PIN1 verification failed
Sep 8 16

22 OpenWrt user.notice qmihelp : wwan0: SIM card missing?
Sep 8 16

22 OpenWrt user.notice qmihelp : wwan0: ***Cannot Connect without PIN verification

kernel log

Показать / Скрыть текст

[ 0.000000] Linux version 3.8.6 (user@mint12) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #26 Sat Apr 13 02

33 EDT 2013
[ 0.000000] MyLoader: sysp=45f474ad, boardp=a8f6ec7e, parts=603a979c
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 8031e490, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=TL-MR3220-v2 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 28728k/32768k available (2280k kernel code, 4040k reserved, 622k data, 232k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] MIPS: machine is TP-LINK TL-MR3220 v2
[ 0.550000] bio: create slab at 0
[ 0.560000] usbcore: registered new interface driver usbfs
[ 0.560000] usbcore: registered new interface driver hub
[ 0.570000] usbcore: registered new device driver USB
[ 0.570000] Switching to clocksource MIPS
[ 0.580000] NET: Registered protocol family 2
[ 0.580000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.580000] TCP: Hash tables configured (established 512 bind 512)
[ 0.590000] TCP: reno registered
[ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.610000] NET: Registered protocol family 1
[ 0.610000] PCI: CLS 0 bytes, default 32
[ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.640000] msgmni has been set to 56
[ 0.650000] io scheduler noop registered
[ 0.650000] io scheduler deadline registered (default)
[ 0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.670000] console [ttyATH0] enabled, bootconsole disabled
[ 0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.690000] m25p80 spi0.0: found s25sl032p, expected m25p80
[ 0.690000] m25p80 spi0.0: s25sl032p (4096 Kbytes)
[ 0.700000] 5 tp-link partitions found on MTD device spi0.0
[ 0.700000] Creating 5 MTD partitions on "spi0.0":
[ 0.710000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.710000] 0x000000020000-0x000000123634 : "kernel"
[ 0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.730000] 0x000000123634-0x0000003f0000 : "rootfs"
[ 0.740000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.750000] mtd: partition "rootfs" set to be root filesystem
[ 0.750000] mtd: partition "rootfs_data" created automatically, ofs=350000, len=A0000
[ 0.760000] 0x000000350000-0x0000003f0000 : "rootfs_data"
[ 0.770000] 0x0000003f0000-0x000000400000 : "art"
[ 0.770000] 0x000000020000-0x0000003f0000 : "firmware"
[ 0.800000] libphy: ag71xx_mdio: probed
[ 0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 1.350000] eth0: Found an AR7240/AR9330 built-in switch
[ 2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 2.950000] usbcore: registered new interface driver cdc_ether
[ 2.950000] usbcore: registered new interface driver rndis_host
[ 2.960000] usbcore: registered new interface driver sierra_net
[ 2.970000] usbcore: registered new interface driver cdc_ncm
[ 2.970000] usbcore: registered new interface driver qmi_wwan
[ 2.980000] usbcore: registered new interface driver cdc_wdm
[ 2.980000] TCP: cubic registered
[ 2.990000] NET: Registered protocol family 17
[ 2.990000] 8021q: 802.1Q VLAN Support v1.8
[ 3.000000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.010000] Freeing unused kernel memory: 232k freed
[ 9.890000] jffs2: notice: (450) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 16 of xref (0 dead, 4 orphan) found.
[ 12.320000] Compat-drivers backport release: compat-drivers-2013-01-21-1
[ 12.330000] Backport based on wireless-testing.git master-2013-02-22
[ 12.330000] compat.git: wireless-testing.git
[ 12.510000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.520000] cfg80211: World regulatory domain updated:
[ 12.520000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.530000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.540000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.540000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.550000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.560000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.490000] ath: EEPROM regdomain: 0x0
[ 13.490000] ath: EEPROM indicates default country code should be used
[ 13.490000] ath: doing EEPROM country->regdmn map search
[ 13.490000] ath: country maps to regdmn code: 0x3a
[ 13.490000] ath: Country alpha2 being used: US
[ 13.490000] ath: Regpair used: 0x3a
[ 13.500000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.510000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 13.520000] cfg80211: Calling CRDA for country: US
[ 13.520000] cfg80211: Regulatory domain changed to country: US
[ 13.520000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.530000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 13.540000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 13.550000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.560000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.560000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.570000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 13.640000] PPP generic driver version 2.4.2
[ 13.910000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.150000] NET: Registered protocol family 24
[ 14.170000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.180000] ehci-platform: EHCI generic platform driver
[ 14.190000] ehci-platform ehci-platform: EHCI Host Controller
[ 14.190000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 14.200000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 14.230000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 14.230000] hub 1-0:1.0: USB hub found
[ 14.230000] hub 1-0:1.0: 1 port detected
[ 14.260000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
[ 14.560000] USB 1-1: new high-speed USB device number 2 using ehci-platform
[ 14.650000] xt_time: kernel timezone is -0000
[ 14.720000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 14.720000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform-1, WWAN/QMI device, 7e:6f:4a:a6:aa:30
[ 14.890000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.920000] uhci_hcd: USB Universal Host Controller Interface driver
[ 15.100000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 15.100000] usbcore: registered new interface driver cdc_acm
[ 15.110000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 15.210000] usbcore: registered new interface driver usbserial
[ 15.220000] usbcore: registered new interface driver usbserial_generic
[ 15.230000] usbserial: USB Serial support registered for generic
[ 15.360000] usbcore: registered new interface driver option
[ 15.360000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 15.390000] usbcore: registered new interface driver qcserial
[ 15.390000] usbserial: USB Serial support registered for Qualcomm USB modem
[ 15.420000] usbcore: registered new interface driver sierra
[ 15.420000] usbserial: USB Serial support registered for Sierra USB modem
[ 15.660000] u32 classifier
[ 15.660000] Performance counters on
[ 15.670000] input device check on
[ 15.670000] Actions configured
[ 15.860000] Mirror/redirect action on
[ 22.040000] device eth0 entered promiscuous mode
[ 27.380000] device wlan0 entered promiscuous mode
[ 27.430000] br-lan: port 2(wlan0) entered forwarding state
[ 27.430000] br-lan: port 2(wlan0) entered forwarding state
[ 29.430000] br-lan: port 2(wlan0) entered forwarding state
[ 37.700000] device wlan0 left promiscuous mode
[ 37.700000] br-lan: port 2(wlan0) entered disabled state
[ 38.880000] device wlan0 entered promiscuous mode
[ 39.040000] br-lan: port 2(wlan0) entered forwarding state
[ 39.050000] br-lan: port 2(wlan0) entered forwarding state
[ 41.050000] br-lan: port 2(wlan0) entered forwarding state
[ 41.460000] br-lan: port 2(wlan0) entered disabled state
[ 41.470000] device wlan0 left promiscuous mode
[ 41.470000] br-lan: port 2(wlan0) entered disabled state
[ 41.480000] device eth0 left promiscuous mode
[ 41.480000] br-lan: port 1(eth0) entered disabled state
[ 42.550000] device eth0 entered promiscuous mode
[ 47.610000] device wlan0 entered promiscuous mode
[ 47.760000] br-lan: port 2(wlan0) entered forwarding state
[ 47.770000] br-lan: port 2(wlan0) entered forwarding state
[ 49.770000] br-lan: port 2(wlan0) entered forwarding state
[ 155.650000] USB 1-1: USB disconnect, device number 2
[ 155.660000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1, WWAN/QMI device
[ 155.960000] USB 1-1: new high-speed USB device number 3 using ehci-platform
[ 156.110000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 156.130000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 156.140000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform-1, WWAN/QMI device, 7e:6f:4a:a6:aa:30
[ 320.790000] device wlan0 left promiscuous mode
[ 320.790000] br-lan: port 2(wlan0) entered disabled state
[ 325.020000] USB 1-1: USB disconnect, device number 3
[ 325.030000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1, WWAN/QMI device
[ 325.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 325.580000] USB 1-1: new high-speed USB device number 5 using ehci-platform
[ 325.740000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 326.020000] USB 1-1: new high-speed USB device number 6 using ehci-platform
[ 326.170000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 326.230000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 326.240000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform-1, WWAN/QMI device, 7e:6f:4a:a6:aa:30
[ 327.860000] device wlan0 entered promiscuous mode
[ 328.130000] br-lan: port 2(wlan0) entered forwarding state
[ 328.130000] br-lan: port 2(wlan0) entered forwarding state
[ 330.130000] br-lan: port 2(wlan0) entered forwarding state
[ 337.180000] USB 1-1: USB disconnect, device number 6
[ 337.190000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1, WWAN/QMI device
[ 337.470000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 337.750000] USB 1-1: new high-speed USB device number 8 using ehci-platform
[ 337.900000] cdc_acm 1-1:1.0: ttyACM1: USB ACM device
[ 337.950000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 337.960000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform-1, WWAN/QMI device, 7e:6f:4a:a6:aa:30
[ 402.490000] device wlan0 left promiscuous mode
[ 402.500000] br-lan: port 2(wlan0) entered disabled state
[ 422.690000] device wlan0 entered promiscuous mode
[ 423.310000] br-lan: port 2(wlan0) entered forwarding state
[ 423.310000] br-lan: port 2(wlan0) entered forwarding state
[ 425.310000] br-lan: port 2(wlan0) entered forwarding state
[ 786.310000] device wlan0 left promiscuous mode
[ 786.310000] br-lan: port 2(wlan0) entered disabled state
[ 791.050000] USB 1-1: USB disconnect, device number 8
[ 791.060000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1, WWAN/QMI device
[ 791.380000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 791.660000] USB 1-1: new high-speed USB device number 10 using ehci-platform
[ 791.810000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 792.000000] qmi_wwan: probe of 1-1:1.5 failed with error -71
[ 792.010000] USB 1-1: USB disconnect, device number 10
[ 792.410000] USB 1-1: new high-speed USB device number 11 using ehci-platform
[ 792.560000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 792.680000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 792.680000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform-1, WWAN/QMI device, 7e:6f:4a:a6:aa:30
[ 794.460000] USB 1-1: USB disconnect, device number 11
[ 794.470000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1, WWAN/QMI device
[ 794.800000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 795.020000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 795.240000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 795.460000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 795.680000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 795.900000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 796.120000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 796.340000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 796.560000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 796.780000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 797.000000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 797.220000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 797.440000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 797.660000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 797.880000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 798.100000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 798.320000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 798.540000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 798.760000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 798.980000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 799.200000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 799.420000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 799.640000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 799.860000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 800.140000] USB 1-1: new high-speed USB device number 36 using ehci-platform
[ 800.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 800.520000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 800.740000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 800.960000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 801.180000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 801.400000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 801.620000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 801.840000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 802.060000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 802.280000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 802.500000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 802.720000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 802.940000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 803.160000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 803.380000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 803.600000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 803.820000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 804.040000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 804.260000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 804.480000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 804.700000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 804.920000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 805.140000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 805.360000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 805.580000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 805.800000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 806.020000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 806.240000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 806.460000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 806.680000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 806.960000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 807.070000] device wlan0 entered promiscuous mode
[ 807.270000] br-lan: port 2(wlan0) entered forwarding state
[ 807.280000] br-lan: port 2(wlan0) entered forwarding state
[ 807.420000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 807.640000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 807.860000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 808.080000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 808.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 808.520000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 808.740000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 808.960000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 809.180000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 809.280000] br-lan: port 2(wlan0) entered forwarding state
[ 809.400000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 809.620000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 809.840000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 810.060000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 810.280000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 810.500000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 810.720000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 811.010000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 811.230000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 811.450000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 811.670000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 811.890000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 812.110000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 812.330000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 812.550000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 812.770000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 812.990000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 813.210000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 813.430000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 813.650000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 813.870000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 814.090000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 814.310000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 814.530000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 814.750000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 814.970000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 815.190000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 815.410000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 815.630000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 815.850000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 816.070000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 816.290000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 816.510000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 816.730000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 816.950000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 817.170000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 817.390000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 817.610000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 817.830000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 818.050000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 818.270000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 818.490000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 818.710000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 818.930000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 819.150000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 819.370000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 819.590000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 819.810000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 820.030000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 820.250000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 820.470000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 820.690000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 820.910000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 821.130000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 821.410000] USB 1-1: new high-speed USB device number 4 using ehci-platform
[ 821.560000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 821.570000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 821.570000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform-1, WWAN/QMI device, 7e:6f:4a:a6:aa:30
[ 824.610000] br-lan: port 2(wlan0) entered disabled state
[ 824.610000] device wlan0 left promiscuous mode
[ 824.610000] br-lan: port 2(wlan0) entered disabled state
[ 824.620000] device eth0 left promiscuous mode
[ 824.630000] br-lan: port 1(eth0) entered disabled state
[ 825.670000] device eth0 entered promiscuous mode
[ 830.530000] device wlan0 entered promiscuous mode
[ 830.690000] br-lan: port 2(wlan0) entered forwarding state
[ 830.690000] br-lan: port 2(wlan0) entered forwarding state
[ 832.690000] br-lan: port 2(wlan0) entered forwarding state

Смена пароля и имени результата не дала.

Добавлено спустя 5 минут 14 секунд:

Забыла добавить

Добавлено спустя 10 минут 3 секунды:

При нажатии DECREASE пишет UNKNOWN

Скин с MODEM

На windows PuTTY не получилось.

Добавлено спустя 1 час 12 минут 58 секунд:

dmesg получилось:

Показать / Скрыть текст

[ 2.950000] usbcore: registered new interface driver cdc_ether
[ 2.950000] usbcore: registered new interface driver rndis_host
[ 2.960000] usbcore: registered new interface driver sierra_net
[ 2.970000] usbcore: registered new interface driver cdc_ncm
[ 2.970000] usbcore: registered new interface driver qmi_wwan
[ 2.980000] usbcore: registered new interface driver cdc_wdm
[ 2.980000] TCP: cubic registered
[ 2.990000] NET: Registered protocol family 17
[ 2.990000] 8021q: 802.1Q VLAN Support v1.8
[ 3.000000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.010000] Freeing unused kernel memory: 232k freed
[ 9.940000] jffs2: notice: (450) jffs2_build_xattr_subsystem: complete buildi ng xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 13 of xref (0 dead, 1 orphan) found.
[ 12.360000] Compat-drivers backport release: compat-drivers-2013-01-21-1
[ 12.370000] Backport based on wireless-testing.git master-2013-02-22
[ 12.370000] compat.git: wireless-testing.git
[ 12.570000] cfg80211: Calling CRDA to update world regulatory domain
[ 12.570000] cfg80211: World regulatory domain updated:
[ 12.580000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 12.580000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 12.590000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm)
[ 12.600000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm)
[ 12.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 12.610000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 13.530000] ath: EEPROM regdomain: 0x0
[ 13.530000] ath: EEPROM indicates default country code should be used
[ 13.530000] ath: doing EEPROM country->regdmn map search
[ 13.530000] ath: country maps to regdmn code: 0x3a
[ 13.530000] ath: Country alpha2 being used: US
[ 13.530000] ath: Regpair used: 0x3a
[ 13.540000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.550000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 13.560000] cfg80211: Calling CRDA for country: US
[ 13.560000] cfg80211: Regulatory domain changed to country: US
[ 13.560000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp)
[ 13.570000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 27 00 mBm)
[ 13.580000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 17 00 mBm)
[ 13.590000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 13.600000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 13.600000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm)
[ 13.610000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 30 00 mBm)
[ 13.680000] PPP generic driver version 2.4.2
[ 13.950000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.180000] NET: Registered protocol family 24
[ 14.200000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.220000] ehci-platform: EHCI generic platform driver
[ 14.230000] ehci-platform ehci-platform: EHCI Host Controller
[ 14.230000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 14.240000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 14.270000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 14.270000] hub 1-0:1.0: USB hub found
[ 14.270000] hub 1-0:1.0: 1 port detected
[ 14.300000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
[ 14.540000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 14.700000] xt_time: kernel timezone is -0000
[ 14.760000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 14.920000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.940000] uhci_hcd: USB Universal Host Controller Interface driver
[ 15.020000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 15.120000] usbcore: registered new interface driver cdc_acm
[ 15.130000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters
[ 15.240000] usbcore: registered new interface driver usbserial
[ 15.240000] usbcore: registered new interface driver usbserial_generic
[ 15.250000] usbserial: USB Serial support registered for generic
[ 15.380000] usbcore: registered new interface driver option
[ 15.390000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 15.410000] usbcore: registered new interface driver qcserial
[ 15.410000] usbserial: USB Serial support registered for Qualcomm USB modem
[ 15.440000] usbcore: registered new interface driver sierra
[ 15.440000] usbserial: USB Serial support registered for Sierra USB modem
[ 15.510000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 15.690000] u32 classifier
[ 15.690000] Performance counters on
[ 15.690000] input device check on
[ 15.690000] Actions configured
[ 15.890000] Mirror/redirect action on
[ 15.920000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 16.150000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 16.370000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 16.590000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 16.870000] USB 1-1: new high-speed USB device number 10 using ehci-platform
[ 17.050000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 17.150000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 17.150000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 17.160000] USB 1-1: USB disconnect, device number 10
[ 17.170000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 17.460000] USB 1-1: new high-speed USB device number 11 using ehci-platform
[ 17.700000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 18.790000] USB 1-1: new high-speed USB device number 12 using ehci-platform
[ 19.080000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 19.110000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 19.110000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 19.440000] USB 1-1: USB disconnect, device number 12
[ 19.450000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 19.750000] USB 1-1: new high-speed USB device number 13 using ehci-platform
[ 19.910000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 20.190000] USB 1-1: new high-speed USB device number 14 using ehci-platform
[ 20.340000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 20.370000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 20.370000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 21.150000] USB 1-1: USB disconnect, device number 14
[ 21.160000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 21.740000] device eth0 entered promiscuous mode
[ 22.110000] USB 1-1: new high-speed USB device number 15 using ehci-platform
[ 22.350000] USB 1-1: device descriptor read/all, error -71
[ 22.430000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 22.670000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 23.030000] USB 1-1: new high-speed USB device number 18 using ehci-platform
[ 23.250000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 23.350000] qmi_wwan: probe of 1-1:1.5 failed with error -71
[ 23.360000] USB 1-1: USB disconnect, device number 18
[ 23.640000] USB 1-1: new high-speed USB device number 19 using ehci-platform
[ 23.790000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 23.810000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 23.810000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 24.830000] USB 1-1: USB disconnect, device number 19
[ 24.840000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 25.130000] USB 1-1: new high-speed USB device number 20 using ehci-platform
[ 25.280000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 25.290000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 25.290000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 25.530000] USB 1-1: USB disconnect, device number 20
[ 25.530000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 25.840000] USB 1-1: new high-speed USB device number 21 using ehci-platform
[ 26.020000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 26.040000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 26.040000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 27.540000] device wlan0 entered promiscuous mode
[ 27.580000] br-lan: port 2(wlan0) entered forwarding state
[ 27.580000] br-lan: port 2(wlan0) entered forwarding state
[ 29.580000] br-lan: port 2(wlan0) entered forwarding state
[ 30.170000] USB 1-1: USB disconnect, device number 21
[ 30.170000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 30.410000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 30.780000] USB 1-1: new high-speed USB device number 23 using ehci-platform
[ 31.060000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 31.070000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 31.070000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 38.170000] device wlan0 left promiscuous mode
[ 38.170000] br-lan: port 2(wlan0) entered disabled state
[ 39.280000] device wlan0 entered promiscuous mode
[ 39.430000] br-lan: port 2(wlan0) entered forwarding state
[ 39.440000] br-lan: port 2(wlan0) entered forwarding state
[ 41.440000] br-lan: port 2(wlan0) entered forwarding state
[ 46.190000] br-lan: port 2(wlan0) entered disabled state
[ 46.190000] device wlan0 left promiscuous mode
[ 46.200000] br-lan: port 2(wlan0) entered disabled state
[ 46.210000] device eth0 left promiscuous mode
[ 46.210000] br-lan: port 1(eth0) entered disabled state
[ 47.260000] device eth0 entered promiscuous mode
[ 52.490000] device wlan0 entered promiscuous mode
[ 52.670000] br-lan: port 2(wlan0) entered forwarding state
[ 52.670000] br-lan: port 2(wlan0) entered forwarding state
[ 54.670000] br-lan: port 2(wlan0) entered forwarding state
[ 137.500000] USB 1-1: USB disconnect, device number 23
[ 137.510000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 137.820000] USB 1-1: new high-speed USB device number 24 using ehci-platform
[ 137.970000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 137.990000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 137.990000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 393.480000] USB 1-1: USB disconnect, device number 24
[ 393.480000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 393.790000] USB 1-1: new high-speed USB device number 25 using ehci-platform
[ 393.940000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 393.950000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 393.960000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 419.080000] USB 1-1: USB disconnect, device number 25
[ 419.080000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 419.390000] USB 1-1: new high-speed USB device number 26 using ehci-platform
[ 419.540000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 419.570000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 419.570000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 623.880000] USB 1-1: USB disconnect, device number 26
[ 623.890000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 624.210000] USB 1-1: new high-speed USB device number 27 using ehci-platform
[ 624.360000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 624.390000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 624.390000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
[ 690.470000] USB 1-1: USB disconnect, device number 27
[ 690.480000] qmi_wwan 1-1:1.5 wwan0: unregister 'qmi_wwan' USB-ehci-platform-1 , WWAN/QMI device
[ 690.770000] USB 1-1: new high-speed USB device number 28 using ehci-platform
[ 690.920000] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 690.970000] qmi_wwan 1-1:1.5: cdc-wdm0: USB WDM device
[ 690.980000] qmi_wwan 1-1:1.5 wwan0: register 'qmi_wwan' at USB-ehci-platform- 1, WWAN/QMI device, 12:82:f4:a1:a5:6d
root@OpenWrt:~#

без указания причины

Промодерировал: Daskal (6 сентября 2014 12:21)