1. oscam.version
Цитировать
Unix starttime: 1436689440
Starttime: 12.07.2015 1100
Version: oscam-1.20-unstable_svn-r10892
Compiler: mipsel-unknown-linux-gnu
Box type: ebox5000 (generic)
TempDir: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/oscam-emu/
WebifPort: 8888

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: yes
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes
2. PowerVU
Цитировать
For PowerVU the Stream Relay must be used:

IMPORTANT:
The stream relay needs a fast CPU. Not every STB is fast enough.
If you cannot fix stuttering with the following guide, likely your CPU is
too slow.

For best performance, the "Include ECM in http streams" setting must be enabled.
If your image supports it (openpli, openatv), you can find it here:
OpenWebif -> Settings -> Customize

If the setting is not available, you may need to adjust the "ECM fix delay"
setting in oscam webif (Config -> Stream Relay).
Increase/Lower it until there is no stuttering.

When using VU+ devices, make sure to use the latest drivers (June 2015), if
you encounter any problems.

Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
https://stb:8001/1:00123:3EFC00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
https://127.0.0.1:17999/1:00123:3EFC00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)

IMPORTANT:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.

Note:
When using DreamBoxEdit:

A. Go to the list in the middle "Bouquet details".
B. Right click on a channel, select "IPTV and other streaming services", select "Add".
C. Select "DVB/TS".
D. Chosse a name and use the new stream link as URL.
E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")
3. Drecrypt2

WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in flash.
Black Hole does not support images not installed in flash.

This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

Please note that of all images Black Hole now has the best EPG system:

- Integrated OpenEpg

- Rytec dedicated EPG.dat

- New system EPG.dat outside.

This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.

Community members can then download it from our servers.

This feature provides other benefits such as:

Increase download speed of EPG

Download EPG from any channel

Schedule the download of EPG decoder even during standby

Users can customize the providers using Add / Remove function

Main functions of the buttons on the remote

OK button = Skin with simple information

OK button x 2 = Extra Info Skin

Blue button = Black Hole Blue Panel

Blue button and then Red button = Black Hole EPG Panel

Blue button and then Yellow button = System Monitor Panel

Blue button long press = Extensions

Yellow button = Audio menu

Green button = Black Hole Green Panel

Green button long press = Subservices

Green button and then Red button = Fast Plugin Setup

Green button x 2 = Fast Plugin

Button Red short press= access HbbTV functions

Button Red long press= Red Panel (Parallel Universes Teleportation)

Addons

Green button and then Yellow button takes you to:-

Dedicated server for BlackHole addons

Download and install additional packages from the Black Hole server

Infobar / OSD

Analog Clock Gui

Channel orbital location

Advanced Tuner Info: Sr Freq Pol Fec

Signal SNR, BER

Infobar picons

Characteristics of BlackHole Panels

Blue Panel

Extra Settings

Black Hole Speed Up

Black Hole Cron Manager (Manage schedules)

OSD Settings (OSD configuration)

Devices Manager

USB Format Wizard

Kernel Modules Manager(Kernel module operator)

Inadyn Settings (Configure Inadyn)

Swap File Settings (Configure File Swap)

Hard Disk Settings (Configure Hard Drive)

OpenVPN Panel ( OpenVPN Panel)

Samba / CIFS Panel ( Samba Panel)

NFS Server Panel ( NFS server Panel)

telnet Panel ( telnet Panel)

FTP Panel ( FTP Panel)

UPnP Client Djmount

UPnP Server Mediatomb

UPnP Server Minidlna

Pcsc Panel

Tuner Server

Network Browse & Mountpoints

Info Panel

1 - Gui Setting (Gui configurations)

2 - Service Information (information system)

3 - About (info)

Memory (Memory)

Space (capacity)

CPU (processor)

Process (process)

EPG Panel

Global settings (global settings EPG)

Setting Provider (ISP settings)

Green Panel

Fast Plugin Setup (Configure quick access to your favourite plugin)

Fast Plugin (Access your favourite plugin)

Addons (added)

Addons Download Manager (Manager for package downloading)

Online Feeds Settings update

Online Black Hole image update

Manual Install BH packges (Manual installation of Black Hole packages)

Manual Install IPK packages (Manual installation of IPK packages)

Addons Uninstall Panel (Uninstalled packages)

Black Hole Statistics (See connections, top downloads and more)

Characteristics of BlackHole Panels

Red Panel

BH Parallel Universe Teleportation

BlackHole

Avalon

Chaos

Ghost

Credits

Thanks to Pedro_Newbie for Backup script

Thanks to the group of Beta Testers.

Thanks to Rytec for providing us with the server with all EPG.dat files.

Thanks to MaxZ4 for Integrated EPG loader.

Thanks to Skaman for Cross EPG

Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.

Thanks to Reinh@rd for the file satellites.xml.

Thanks to Littlesat and Pli Team for the original autolanguage and subtitle options code

DISCLAIMER

THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

LICENSE (TERM OF USE)

THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.

This is free hobbyist software and it comes with absolutely no warranty. Use it at your own risk.